A335 P23 Alloy Seamless Pipe | Alloy Steel A335 P23 Pipe Suppliers | P23 Seamless Pipe | Alloy Steel Pipe Weight Calculator | Alloy Steel Pipes Price List in India
- Email Id :
- Call Us: :
+91-9821137386
+91-9821137386
Reliant Pipes is a Globally recognized supplier of Alloy Steel Seamless Pipe.our Stainless Steel Division has manufacturing facilities in Ahemdabad , Gujarat, India with an occupied area of approximately 80000 square feet. We manufacture Alloy Steel Seamless Pipe & Pipes in Alloy Steel, Stainless steel and super duplex steel for boilers and heat exchangers. Reliant Pipes is having over 30 years of experience as a manufacturer of Alloy Steel Seamless Pipe in India. Because of our planning, making possible economical manufacture, especially of small and medium sized production lots. we can offer best price of Alloy Steel Seamless Pipe in India and entire Asia.compare our price list of Alloy Steel Seamless Pipe with manufacturer of Alloy Steel Seamless Pipe in China as well quality of Alloy Steel Seamless Pipe.In this manner, our Customers enjoy appreciable economic advantages without compromising in quality of Alloy Steel Seamless Pipe. At Reliant Pipes our Goal is to supply high quality Alloy Steel Seamless Pipe at best price to all countries where we have strong network like India, Vietnam, Philippines, South Africa, Australia, Kenya, Nigeria, Iran, Russia, Japan, Canada and many more European & African Countries.we believe in that offering Alloy Steel Seamless Pipe at best price and prime quality boiler material help us to get Customer delight.
If you don’t see what you’re looking for just call one of our team members at +91-22-66310022 Or Mail Us reliant@reliant.in. No inquiry is too large or too small, we specialize in locating hard to find items. If you do see what you are looking, we would love to assist you and give you a quote today!
Grade | C | Mn | P | S | Si | Cr | Mo |
P5 | 0.15max | 0.30-0.60 | 0.025 | 0.025 | 0.50 max | 4.00-6.00 | 0.45-0.65 |
P9 | 0.15 max | 0.30-0.60 | 0.025 | 0.025 | 0.25-1.00 | 8.00-10.00 | 0.90-1.10 |
P11 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 |
P22 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.50 max | 1.90-2.60 | 0.87-1.13 |
P91 | 0.08-0.12 | 0.30-0.60 | 0.02 | 0.01 | 0.20-0.50 | 8.00-9.50 | 0.85-1.05 |
V 0.18-0.25 | N 0.03-0.07 | Ni 0.40 max | Al 0.02 max | Cb 0.06-0.10 | Ti 0.01 max | Zr 0.01 max |
Mechanical Properties | |||||
Grade | Tensile strength(MPa) | Yield strength(MPa) | Elongation(%) | Impact energy(J) | Hardness |
P11 | ≥ 415 | ≥ 205 | ≥ 22 | ≥ 35 | ≤ 163HB |
P12 | ≥ 415 | ≥ 220 | ≥ 22 | ≥ 35 | ≤ 163HB |
P22 | ≥ 415 | ≥ 205 | ≥ 22 | ≥ 35 | ≤ 163HB |
P5 | ≥ 415 | ≥ 205 | ≥ 22 | ≥ 35 | ≤ 187HB |
P91 | 585~760 | ≥ 415 | ≥ 20 | ≥ 35 | ≤ 250HB |
P92 | ≥ 620 | ≥ 440 | ≥ 20 | ≥ 35 | 250HB |
NPS | OD Tolerance | NPS | WT Tolerance |
1/8″ ≤ NPS ≤ 1 1/2″ | +/- 0.4 | 1/8″ ≤ NPS ≤ 2 1/2″ , All T/D ratios. | +20%, -12.5% |
1 1/2 < NPS ≤ 4″ | +/- 0.79 | NPS ≥ 2 1/2″ , T/D ≤ 5% | +22.5%, -12.5% |
4″ < NPS ≤ 8″ | +1.59, -0.79 | NPS ≥ 2 1/2″ , T/D > 5% | +15%, -12.5% |
8″ < NPS ≤ 12″ | +2.38, -0.79 | (T= Specified Wall Thickness; D = Specified Outside Diameter) | |
NPS > 12″ | +/- 1% | ||
This specification covers seamless ferritic alloy-steel pipe for high-temperature service. The pipe shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Grade P2 and P12 steel pipes shall be made by coarse-grain melting practice. The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The range of pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.
Trade Name | Grade | UNS # | Pipe | Forged / Bored Pipe * |
1 1/4 Chrome | P11 | K11597 | A335 / SA335 | A369 / SA369 |
2 1/4 Chrome | P22 | K21590 | A335 / SA335 | A369 / SA369 |
5 Chrome | P5 | K41545 | A335 / SA335 | A369 / SA369 |
9 Chrome | P9 | S50400 | A335 / SA335 | A369 / SA369 |
P91 | P91 | K91560 | A335 / SA335 | A369 / SA369 |
P92 | P92 | K92460 | A335 / SA335 | A369 / SA369 |
Reliant Pipes is India's 4th largest Stockholder of ASTM A234 WP5, WP9, WP11, WP22, WP91 such as buittweld fittings, forged fittings, forged flanges, fasteners and gaskets.
| Size | : | 1/8NB TO 24NB IN |
| Standards | : | ASTM A 335, ASME SA 335 |
| Type | : | Seamless |
| Specialized in | : | Large Diameter Size |
| Outer Dimensions | : | 19.05mm – 114.3mm |
| Wall Thickness | : | 2.0mm – 14 mm |
| Length | : | max 16000mm |
| Schedule | : | Schedule 20 - Schedule 20,Schedule 40, Schedule 60, Schedule 80, Schedule 100 Schedule 120, Schedule 160, Schedule XS, Schedule XXS (heavier on request) up to 250 mm thk. |
| Form | : | Round, Square, Rectangular, Hydraulic Etc. |
| Length | : | Single Random, Double Random & Cut Length. |
| Tubing End | : | Plain End, Beveled End, Treaded. |
| C, % | Mn, % | P, % | S, % | Si, % | Cr, % | Mo, % |
| 0.015 max | 0.30-0.60 | 0.025 max | 0.025 max | 0.50 max | 4.00-6.00 | 0.45-0.65 |
| Tensile Strength, MPa | Yield Strength, MPa | Elongation, % |
| 415 min | 205 min | 30 min |
| P5, P9, P11, and P22 |
|
|
Grade | Heat Treatment Type | Normalizing Temperature Range F [C] | Subcritical Annealing |
P5 (b,c) | Full or Isothermal Anneal |
| |
| Normalize and Temper | ***** | 1250 [675] |
| Subcritical Anneal (P5c only) | ***** | 1325 - 1375 [715 - 745] |
P9 | Full or Isothermal Anneal |
| |
| Normalize and Temper | ***** | 1250 [675] |
P11 | Full or Isothermal Anneal |
| |
| Normalize and Temper | ***** | 1200 [650] |
P22 | Full or Isothermal Anneal |
| |
| Normalize and Temper | ***** | 1250 [675] |
P91 | Normalize and Temper | 1900-1975 [1040 - 1080] | 1350-1470 [730 - 800] |
| Quench and Temper | 1900-1975 [1040 - 1080] | 1350-1470 [730 - 800] |
| Seamless |
| ||||
P-5 | P-9 | P-11 | P-22 | P-91 | P91 shall not have a hardness not exceeding 250 HB/265 HV [25HRC]. | |
Tensile Strength, min., psi | ||||||
ksi | 60 | 60 | 60 | 60 | 85 | |
MPa | 415 | 415 | 415 | 415 | 585 |
|
Yield Strength, min., psi |
| |||||
ksi | 30 | 30 | 30 | 30 | 60 |
|
MPa | 205 | 205 | 205 | 205 | 415 |
|
