+91-9821137386
We supply a wide range of ferrous and non-ferrous metals in all forms, Reliant Pipes hold stocks of Stainless Steel, Alloy Steel, Nickel alloys and Duplex Steel in all forms. Our range includes over 15, 000 standard stock items including a range of non-standard products., We also hold stocks Stainless Steel Seamless Tubing, Alloy Steel Seamless Pipe, Stainless Steel Seamless Round Tube to suit particular industries and individual customers. We offer a full processing service offering customers cutting, finishing and coating.
Reliant Pipes is reliable manufacturer of Alloy Steel A335 P1 Seamless Pipe in India & comes in top 10 supplier of Alloy Steel A335 P1 Seamless Pipe and SS mechanical tubes in India, we export Alloy Steel Seamless Round Tube / Alloy Steel A335 P1 Seamless Pipe and welded tubing in All Size and Grades to .UK, Italy, Malaysia & Indonesia, we have our dealer & Distributor of Stainless steel Coil tubing & SS Mechanical tubes in all over India, west Africa as well in Europe.
For over 30 years, Reliant Pipes has carried one of the nation’s largest inventories of Stainless steel and specialty alloy piping products. We offer our customers a full line of pipe, fittings and flanges in material grades of carbon, Stainless, high nickel alloys, specialty alloys, and chrome. We have over 28 years experience in Stainless Steel Seamless Tubing, Stainless Steel Seamless Round Tube / Alloy Steel A335 P1 Seamless Pipe and welded tubing in All Size and Grades.
If you don’t see what you’re looking for just call one of our team members at +91-22-66310022 Or Mail Us reliant@reliant.in. No inquiry is too large or too small, we specialize in locating hard to find items. If you do see what you are looking, we would love to assist you and give you a quote today!
Grade | C | Mn | P | S | Si | Cr | Mo |
P5 | 0.15max | 0.30-0.60 | 0.025 | 0.025 | 0.50 max | 4.00-6.00 | 0.45-0.65 |
P9 | 0.15 max | 0.30-0.60 | 0.025 | 0.025 | 0.25-1.00 | 8.00-10.00 | 0.90-1.10 |
P11 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 |
P22 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.50 max | 1.90-2.60 | 0.87-1.13 |
P91 | 0.08-0.12 | 0.30-0.60 | 0.02 | 0.01 | 0.20-0.50 | 8.00-9.50 | 0.85-1.05 |
V 0.18-0.25 | N 0.03-0.07 | Ni 0.40 max | Al 0.02 max | Cb 0.06-0.10 | Ti 0.01 max | Zr 0.01 max |
Mechanical Properties | |||||
Grade | Tensile strength(MPa) | Yield strength(MPa) | Elongation(%) | Impact energy(J) | Hardness |
P11 | ≥ 415 | ≥ 205 | ≥ 22 | ≥ 35 | ≤ 163HB |
P12 | ≥ 415 | ≥ 220 | ≥ 22 | ≥ 35 | ≤ 163HB |
P22 | ≥ 415 | ≥ 205 | ≥ 22 | ≥ 35 | ≤ 163HB |
P5 | ≥ 415 | ≥ 205 | ≥ 22 | ≥ 35 | ≤ 187HB |
P91 | 585~760 | ≥ 415 | ≥ 20 | ≥ 35 | ≤ 250HB |
P92 | ≥ 620 | ≥ 440 | ≥ 20 | ≥ 35 | 250HB |
NPS | OD Tolerance | NPS | WT Tolerance |
1/8″ ≤ NPS ≤ 1 1/2″ | +/- 0.4 | 1/8″ ≤ NPS ≤ 2 1/2″ , All T/D ratios. | +20%, -12.5% |
1 1/2 < NPS ≤ 4″ | +/- 0.79 | NPS ≥ 2 1/2″ , T/D ≤ 5% | +22.5%, -12.5% |
4″ < NPS ≤ 8″ | +1.59, -0.79 | NPS ≥ 2 1/2″ , T/D > 5% | +15%, -12.5% |
8″ < NPS ≤ 12″ | +2.38, -0.79 | (T= Specified Wall Thickness; D = Specified Outside Diameter) | |
NPS > 12″ | +/- 1% |
This specification covers seamless ferritic alloy-steel pipe for high-temperature service. The pipe shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Grade P2 and P12 steel pipes shall be made by coarse-grain melting practice. The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The range of pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.
Trade Name | Grade | UNS # | Pipe | Forged / Bored Pipe * |
1 1/4 Chrome | P11 | K11597 | A335 / SA335 | A369 / SA369 |
2 1/4 Chrome | P22 | K21590 | A335 / SA335 | A369 / SA369 |
5 Chrome | P5 | K41545 | A335 / SA335 | A369 / SA369 |
9 Chrome | P9 | S50400 | A335 / SA335 | A369 / SA369 |
P91 | P91 | K91560 | A335 / SA335 | A369 / SA369 |
P92 | P92 | K92460 | A335 / SA335 | A369 / SA369 |
Reliant Pipes is India's 4th largest Stockholder of ASTM A234 WP5, WP9, WP11, WP22, WP91 such as buittweld fittings, forged fittings, forged flanges, fasteners and gaskets.
Size | : | 1/8NB TO 24NB IN |
Standards | : | ASTM A 335, ASME SA 335 |
Type | : | Seamless |
Specialized in | : | Large Diameter Size |
Outer Dimensions | : | 19.05mm – 114.3mm |
Wall Thickness | : | 2.0mm – 14 mm |
Length | : | max 16000mm |
Schedule | : | Schedule 20 - Schedule 20,Schedule 40, Schedule 60, Schedule 80, Schedule 100 Schedule 120, Schedule 160, Schedule XS, Schedule XXS (heavier on request) up to 250 mm thk. |
Form | : | Round, Square, Rectangular, Hydraulic Etc. |
Length | : | Single Random, Double Random & Cut Length. |
Tubing End | : | Plain End, Beveled End, Treaded. |
C, % | Mn, % | P, % | S, % | Si, % | Cr, % | Mo, % |
0.015 max | 0.30-0.60 | 0.025 max | 0.025 max | 0.50 max | 4.00-6.00 | 0.45-0.65 |
Tensile Strength, MPa | Yield Strength, MPa | Elongation, % |
415 min | 205 min | 30 min |
| P5, P9, P11, and P22 |
|
|
Grade | Heat Treatment Type | Normalizing Temperature Range F [C] | Subcritical Annealing |
P5 (b,c) | Full or Isothermal Anneal |
| |
| Normalize and Temper | ***** | 1250 [675] |
| Subcritical Anneal (P5c only) | ***** | 1325 - 1375 [715 - 745] |
P9 | Full or Isothermal Anneal |
| |
| Normalize and Temper | ***** | 1250 [675] |
P11 | Full or Isothermal Anneal |
| |
| Normalize and Temper | ***** | 1200 [650] |
P22 | Full or Isothermal Anneal |
| |
| Normalize and Temper | ***** | 1250 [675] |
P91 | Normalize and Temper | 1900-1975 [1040 - 1080] | 1350-1470 [730 - 800] |
| Quench and Temper | 1900-1975 [1040 - 1080] | 1350-1470 [730 - 800] |
| Seamless |
| ||||
P-5 | P-9 | P-11 | P-22 | P-91 | P91 shall not have a hardness not exceeding 250 HB/265 HV [25HRC]. | |
Tensile Strength, min., psi | ||||||
ksi | 60 | 60 | 60 | 60 | 85 | |
MPa | 415 | 415 | 415 | 415 | 585 |
|
Yield Strength, min., psi |
| |||||
ksi | 30 | 30 | 30 | 30 | 60 |
|
MPa | 205 | 205 | 205 | 205 | 415 |
|