api 5l x52 pipe price, api 5l x52 pipe equivalent, api 5l x52 pipe mechanical properties, api 5l x52 pipe fittings, api 5l x52 pipe thickness, api 5l x52 pipe sizes
- Email Id :
- Call Us: :
+91-9821137386
+91-9821137386
| API Pipe Grade | Price | Inventory | Country Name |
|---|---|---|---|
API 5L Pipe | US $700-900 / Ton (FOB Price) | 10000 Tons | Middle East, Africa, Asia |
API X42 Pipe | US $650-1050 / Ton (FOB Price) | 10000 Tons | Middle East,Africa, Southeast Asia, European and South America |
API X52 Pipe | US $650-800 / Ton (FOB Price) | 10000 Tons | Middle East, Africa, Asia, Kuwait, Indonesia, Saudi Arabia, Korea |
API X56 Pipe | US $650-1050 / Ton (FOB Price) | 10000 Tons | Middle East, Africa, Asia, Indonesia, Saudi Arabia |
API X60 Pipe | US $650-1050 / Ton (FOB Price) | 10000 Tons | Middle East, Africa, Thailand, Kuwait, Indonesia, Saudi Arabia, Mexico, Malaysia |
API X65 Pipe | US $650-1050 / Ton (FOB Price) | 10000 Tons | Middle East, Africa, Thailand, Kuwait, Indonesia, Saudi Arabia, Mexico, Malaysia |
API X70 Pipe | US $650-1050 / Ton (FOB Price) | 10000 Tons | Middle East, Africa, Qatar, Indonesia, Saudi Arabia, Russia |
API X80 Pipe | US $500-850 / Ton (FOB Price) | 10000 Tons | Middle East, Africa, Qatar, Indonesia, Saudi Arabia, Russia |
| Characteristic | What to Specify |
| Quantity | Feet or number of lengths |
| Size | NPS (Outside Diameter) and Schedule Number (Average Wall Thickness) |
| PSL | PSL 1 or PSL 2 |
| Grade | X42, X52, X60, etc |
| Construction | Seamless or Welded |
| Coating | Bare, Black, FBE, etc |
| Sizes | Nominal Pipe Size 1/2" to 48 " O.D. Wall Thickness – Schedule 10 through 160, STD, XS, XXS. |
|---|
Grades covered by this specification are A25 ,A ,B (and the following “X” Grades), X42, X46, X52, X56, X60, X65, X70, X80. The two digit number following the “X” indicates the Minimum Yield Strength (in 000's psi) of pipe produced to this grade
api 5l x52 pipe schedule
| Schedule 10 | Schedule 20 | Schedule 30 |
| Schedule 40 | Schedule 60 | Schedule 80 |
| Schedule 100 | Schedule 120 | Schedule 140 |
| Schedule 160 | Schedule XS | Schedule XXS |
| CHEMICAL COMPOSITION | ||||||||||
| C | Si | MN | P | S | V | Nb | Ti | Other | Carbon Equivalent | |
| Max (b) | Max | Max (b) | Max | Max | Max | Max | Max | % maximum | ||
| CE(IIW) | CE(Pcm) | |||||||||
| 0.26 | - | 1.40 | 0.030 | 0.030 | (d) | (d) | (d) | (a) | - | - |
| MECHANICAL REQUIREMENT | ||||||||||
| Tensile Requirements on Pipe body of welded pipes | Ratio | Elongation | CVN Absorbed Energy | Heat Treatment | ||||||
| Yield Strength (R10.5) | Tensile Strength (R) | R 10.5/ R | % | 0 degree celsius | ||||||
| PSI | Mpa | PSI | Mpa | Max | Minimum | Min J | Min ft. lb | Wield Seam & HAZ Normalizing | ||
| 52,200 min | 360 min | 66,700 min | 460 min | - | - | - | ||||
API 5L Line Pipe is dimensionally equivalent to A106 and A53 pipe, API 5L X42 X52 X56 X60 X65 X70.
API 5L X52. Grade X52 indicates 52000 PSI minimum yield strength and 66000 PSI minimum ultimate tensile strength.
We supply forged fittings in API 5L X52, X56, X60, X65 and X70 in accordance with ASTM material standards:
Meeting NORSOK Standard
ANSI B.16.9 / ANSI B.16.25
Standard 2" - 16"
Other sizes available
A105
A350 LF 2
A694 F52
A182 F316L
A182 F51
A182 F55
The American Petroleum Institute specification API 5L covers seamless and welded steel line pipe. This is steel pipe for pipeline transportation systems in the petroleum and natural gas industries. API 5L is suitable for conveying gas, water, and oil. Size range is limited only by manufacturer’s capabilities.
Specifications for API 5L adhere to the International Organization for Standardization ISO 3183, which standardizes pipeline transportation systems within the materials, equipment and offshore structures for petroleum, petrochemical, and natural gas industries. The technical committee authoring the standards recognized that there are two basic Product Specifications Levels (PSL) of technical requirements and therefore developed PSL 1 and PSL 2. PSL 1 is a standard quality for line pipe where PSL 2 contains additional chemical, mechanical properties, and testing requirements.
Grades covered by this specification are A25 ,A ,B (and the following “X” Grades), X42, X46, X52, X56, X60, X65, X70, X80. The two digit number following the “X” indicates the Minimum Yield Strength (in 000’s psi) of pipe produced to this grade.
Reliant Pipes stocks a full range of API 5L X52 PSL-1 & PSL-2 line pipe in seamless.
Sizes
Nominal Pipe Size 2″ to 24″ O.D.
Wall Thickness – Schedule 10 through 160, STD, XS, XXS.
Welded and Seamless Pipe. Plain and Threaded Pipe Ends. Specification API 5L is suitable for conveying gas, water and oil in both Oil and Natural Gas industries.
Pipe manufactured to ASTM106 Grade A or B are not interchangable with API 5L. Requirements to API 5L X grades are more stringent; rolled grades are not acceptable and rework is not allowed. Moreover, particular attention is given to toughness and toughness tests for sour services and higher pressure & temperature classes.
| Product Name | API 5L ERW Steel Pipe |
|---|---|
| Diameter | 1inch – 26inch |
| Wall Thickness | SCH 10,SCH 20,SCH 30,STD,SCH 40, SCH 60 |
| Length | Random length from 3m to 12m |
| Pipe Standard | API 5L, CSA Z245, ASTM A53, A106 or other standards |
| Steel Grade | GR A, GR B, X42, X46, X52, X56, X60, X65, X70, S275, S355 |
| Application | Line pipe, fluid pipe, water pipe, structure steel tube,piling tube, |
| Pipe Coating | Black painting, varnish paint, anti rust oil, or other coating required |
| Package | Plastic caps on both ends, Steel bundle, or acc. to customers’ request |
| Inspection | SGS,BV, GL, Moody or other TPI appointed by customer |
| Capacity | 10000 metric tons per month |
| Delivery time | 30 days against deposit or LC at sight |
Download API 5L ERW Steel Pipe Dimensions Table
Physical Properties
| API 5L Grade | Yield Strength min. (ksi) | Tensile Strength min. (ksi) | Yield to Tensile Ratio (max.) | Elongation min. %1 |
|---|---|---|---|---|
| A | 30 | 48 | 0.93 | 28 |
| B | 35 | 60 | 0.93 | 23 |
| X42 | 42 | 60 | 0.93 | 23 |
| X46 | 46 | 63 | 0.93 | 22 |
| X52 | 52 | 66 | 0.93 | 21 |
| X56 | 56 | 71 | 0.93 | 19 |
| X60 | 60 | 75 | 0.93 | 19 |
| X65 | 65 | 77 | 0.93 | 18 |
| X70 | 70 | 82 | 0.93 | 17 |
| X80 | 80 | 90 | 0.93 | 16 |
| Product | Standard | Steel Grade | Application |
|---|---|---|---|
| Line Pipe | API 5L, ASTM A53/A106, DIN1629, JIS G3454, JIS3466 | A, B, X42, X46, X52, X56, X60, X65, X70, St37, ST52 | Transmission of the petroleum, natural gas and water |
| Cylinder Pipe | GB18248 | 34Mn2V, 37Mn, 30CrMo, 34CrMo4 | Raw material for producing cylinder |
| Boiler Tube | ASME SA106, ASME SA210, ASME SA213, ASME SA335, DIN 17175, GB3087, GB5310 | A, B, V, T11, T12, T22, T91, St35.8, St45.8, 20#, 20G, 20MnG, 20MoG, 15CrMoG, 12Cr1MoVG | Low & medium & high pressure boiler header, steam pipe, heating pipe |
| Structure Pipe | ASTM A53/A106, GB8162 | A, B, 20#, 45#, Q345, 20Mn2, 42CrMo | Used for producing mechanical parts and pipe fittings |
| Hydraulic Tube | GB17396 | 35#, 45#, 27SiMn, 20CrMo4, 30CrMo4 | Mining machinery |
| Oil Cracking Tube | ASME SA213, GB9948 | T5, T9, 20#, 16Mn, 12CrMo, 15CrMo | Used in petroleum cracking furnace |
| Chemical Pipe | GB6479 | 20#, 16Mn, 12CrMo, 15CrMo | High pressure chemical equipment and tube |
For a chart of Carbon Steel Pipe Dimensions and Weights
| Pipe Size (nominal) | Schedule | Outside Diameter | Inside Diameter | Wall Thickness | Wt. Lbs. Per Foot |
| 1/2 | 5 | .840 | .710 | .065 | .5383 |
| 1/2 | 10 | .840 | .674 | .083 | .6710 |
| 1/2 | 40 | .840 | .622 | .109 | .8510 |
| 1/2 | STD | .840 | .622 | .109 | .8510 |
| 1/2 | XH | .840 | .546 | .147 | 1.088 |
| 1/2 | 80 | .840 | .546 | .147 | 1.088 |
| 1/2 | 160 | .840 | .466 | .187 | 1.304 |
| 1/2 | XXH | .840 | .252 | .294 | 1.714 |
| 3/4 | 5 | 1.050 | .920 | .065 | .6838 |
| 3/4 | 10 | 1.050 | .884 | .083 | .8572 |
| 3/4 | 40 | 1.050 | .824 | .113 | 1.131 |
| 3/4 | STD | 1.050 | .824 | .113 | 1.131 |
| 3/4 | XH | 1.050 | .742 | .154 | 1.474 |
| 3/4 | 80 | 1.050 | .742 | .154 | 1.474 |
| 3/4 | 160 | 1.050 | .614 | .218 | 1.937 |
| 3/4 | XXH | 1.050 | .434 | .308 | 2.441 |
| 1 | 5 | 1.315 | 1.185 | .065 | .8678 |
| 1 | 10 | 1.315 | 1.097 | .109 | 1.404 |
| 1 | 40 | 1.315 | 1.049 | .133 | 1.679 |
| 1 | STD | 1.315 | 1.049 | .133 | 1.679 |
| 1 | XH | 1.315 | .957 | .179 | 2.172 |
| 1 | 80 | 1.315 | .957 | .179 | 2.172 |
| 1 | 160 | 1.315 | .815 | .250 | 2.844 |
| 1 | XXH | 1.315 | .599 | .358 | 3.659 |
| 1-1/4 | 5 | 1.660 | 1.530 | .065 | 1.107 |
| 1-1/4 | 10 | 1.660 | 1.442 | .109 | 1.806 |
| 1-1/4 | 40 | 1.660 | 1.380 | .140 | 2.273 |
| 1-1/4 | STD | 1.660 | 1.380 | .140 | 2.273 |
| 1-1/4 | XH | 1.660 | 1.278 | .191 | 2.997 |
| 1-1/4 | 80 | 1.660 | 1.278 | .191 | 2.997 |
| 1-1/4 | 160 | 1.660 | 1.160 | .250 | 3.765 |
| 1-1/4 | XXH | 1.660 | .896 | .382 | 5.214 |
| 1-1/2 | 5 | 1.900 | 1.770 | .065 | 1.274 |
| 1-1/2 | 10 | 1.900 | 1.682 | .109 | 2.085 |
| 1-1/2 | 40 | 1.900 | 1.610 | .145 | 2.718 |
| 1-1/2 | STD | 1.900 | 1.610 | .145 | 2.718 |
| 1-1/2 | XH | 1.900 | 1.500 | .200 | 3.631 |
| 1-1/2 | 80 | 1.900 | 1.500 | .200 | 3.631 |
| 1-1/2 | 160 | 1.900 | 1.338 | .281 | 4.859 |
| 1-1/2 | XXH | 1.900 | 1.100 | .400 | 6.408 |
| 2 | 5 | 2.375 | 2.245 | .065 | 1.604 |
| 2 | 10 | 2.375 | 2.157 | .109 | 2.638 |
| 2 | STD | 2.375 | 2.067 | .154 | 3.653 |
| 2 | 40 | 2.375 | 2.067 | .154 | 3.653 |
| 2 | XH | 2.375 | 1.939 | .218 | 5.022 |
| 2 | 80 | 2.375 | 1.939 | .218 | 5.022 |
| 2 | 160 | 2.375 | 1.687 | .344 | 7.462 |
| 2 | XXH | 2.375 | 1.503 | .436 | 9.029 |
| 2-1/2 | 5 | 2.875 | 2.709 | .083 | 2.475 |
| 2-1/2 | 10 | 2.875 | 2.635 | .120 | 3.531 |
| 2-1/2 | STD | 2.875 | 2.469 | .203 | 5.793 |
| 2-1/2 | 40 | 2.875 | 2.469 | .203 | 5.793 |
| 2-1/2 | XH | 2.875 | 2.323 | .276 | 7.661 |
| 2-1/2 | 80 | 2.875 | 2.323 | .276 | 7.661 |
| 2-1/2 | 160 | 2.875 | 2.125 | .375 | 10.01 |
| 2-1/2 | XXH | 2.875 | 1.771 | .552 | 13.70 |
| 3 | 5 | 3.500 | 3.334 | .083 | 3.029 |
| 3 | 10 | 3.500 | 3.260 | .120 | 4.332 |
| 3 | STD | 3.500 | 3.068 | .216 | 7.576 |
| 3 | 40 | 3.500 | 3.068 | .216 | 7.576 |
| 3 | XH | 3.500 | 2.900 | .300 | 10.25 |
| 3 | 80 | 3.500 | 2.900 | .300 | 10.25 |
| 3 | 160 | 3.500 | 2.625 | .438 | 14.32 |
| 3 | XXH | 3.500 | 2.300 | .600 | 18.58 |
| 3-1/2 | 5 | 4.000 | 3.834 | .083 | 3.472 |
| 3-1/2 | 10 | 4.000 | 3.760 | .120 | 4.973 |
| 3-1/2 | STD | 4.000 | 3.548 | .226 | 9.109 |
| 3-1/2 | 40 | 4.000 | 3.548 | .226 | 9.109 |
| 3-1/2 | XH | 4.000 | 3.364 | .318 | 12.51 |
| 3-1/2 | 80 | 4.000 | 3.364 | .318 | 12.51 |
| 3-1/2 | XXH | 4.000 | 2.728 | .636 | 22.85 |
| 4 | 5 | 4.500 | 4.334 | .083 | 3.915 |
| 4 | 10 | 4.500 | 4.260 | .120 | 5.613 |
| 4 | STD | 4.500 | 4.026 | .237 | 10.79 |
| 4 | 40 | 4.500 | 4.026 | .237 | 10.79 |
| 4 | XH | 4.500 | 3.826 | .337 | 14.98 |
| 4 | 80 | 4.500 | 3.826 | .337 | 14.98 |
| 4 | 120 | 4.500 | 3.625 | .438 | 19.00 |
| 4 | 160 | 4.500 | 3.438 | .531 | 22.51 |
| 4 | XXH | 4.500 | 3.152 | .674 | 27.54 |
| 4-1/2 | STD | 5.000 | 4.506 | .247 | 12.54 |
| 4-1/2 | XH | 5.000 | 4.290 | .355 | 17.61 |
| 5 | 5 | 5.563 | 5.345 | .109 | 6.349 |
| 5 | 10 | 5.563 | 5.295 | .134 | 7.770 |
| 5 | STD | 5.563 | 5.047 | .258 | 14.62 |
| 5 | 40 | 5.563 | 5.047 | .258 | 14.62 |
| 5 | XH | 5.563 | 4.813 | .375 | 20.78 |
| 5 | 80 | 5.563 | 4.813 | .375 | 20.78 |
| 5 | 120 | 5.563 | 4.563 | .500 | 27.04 |
| 5 | 160 | 5.563 | 4.313 | .625 | 32.96 |
| 5 | XXH | 5.563 | 4.063 | .750 | 38.55 |
| 6 | 5 | 6.625 | 6.407 | .109 | 7.585 |
| 6 | 10 | 6.625 | 6.357 | .134 | 9.289 |
| 6 | STD | 6.625 | 6.065 | .280 | 18.97 |
| 6 | 40 | 6.625 | 6.065 | .280 | 18.97 |
| 6 | XH | 6.625 | 5.761 | .432 | 28.57 |
| 6 | 80 | 6.625 | 5.761 | .432 | 28.57 |
| 6 | 120 | 6.625 | 5.500 | .562 | 36.39 |
| 6 | 160 | 6.625 | 5.187 | .719 | 45.35 |
| 6 | XXH | 6.625 | 4.897 | .864 | 53.16 |
| 7 | STD | 7.625 | 7.023 | .301 | 23.54 |
| 7 | XH | 7.625 | 6.625 | .500 | 38.04 |
| 7 | XXH | 7.625 | 5.875 | .875 | 63.08 |
| 8 | 5 | 8.625 | 8.407 | .109 | 9.914 |
| 8 | 10 | 8.625 | 8.329 | .148 | 13.40 |
| 8 | 20 | 8.625 | 8.125 | .250 | 22.36 |
| 8 | 30 | 8.625 | 8.071 | .277 | 24.70 |
| 8 | STD | 8.625 | 7.981 | .322 | 28.55 |
| 8 | 40 | 8.625 | 7.981 | .322 | 28.55 |
| 8 | 60 | 8.625 | 7.813 | .406 | 35.64 |
| 8 | XH | 8.625 | 7.625 | .500 | 43.39 |
| 8 | 80 | 8.625 | 7.625 | .500 | 43.39 |
| 8 | 100 | 8.625 | 7.437 | .594 | 50.95 |
| 8 | 120 | 8.625 | 7.187 | .719 | 60.71 |
| 8 | 140 | 8.625 | 7.000 | .812 | 67.76 |
| 8 | 160 | 8.625 | 6.813 | .906 | 74.69 |
| 8 | XXH | 8.625 | 6.875 | .875 | 72.42 |
| 9 | STD | 9.625 | 8.941 | .342 | 33.91 |
| 9 | XH | 9.625 | 8.625 | .500 | 48.73 |
| 10 | 5 | 10.750 | 10.482 | .134 | 15.19 |
| 10 | 10 | 10.750 | 10.420 | .165 | 18.70 |
| 10 | 20 | 10.750 | 10.250 | .250 | 28.04 |
| 10 | 30 | 10.750 | 10.136 | .307 | 34.24 |
| 10 | STD | 10.750 | 10.020 | .365 | 40.48 |
| 10 | 40 | 10.750 | 10.020 | .365 | 40.48 |
| 10 | 60 | 10.750 | 9.750 | .500 | 54.74 |
| 10 | XH | 10.750 | 9.750 | .500 | 54.74 |
| 10 | 80 | 10.750 | 9.562 | .594 | 64.43 |
| 10 | 100 | 10.750 | 9.312 | .719 | 77.03 |
| 10 | 120 | 10.750 | 9.062 | .844 | 89.29 |
| 10 | 140 | 10.750 | 8.750 | 1.000 | 104.1 |
| 10 | 160 | 10.750 | 8.500 | 1.125 | 115.6 |
| 10 | XXH | 10.750 | 8.750 | 1.000 | 104.1 |
| 11 | STD | 11.750 | 11.000 | .375 | 45.56 |
| 11 | XH | 11.750 | 10.7500 | .500 | 60.08 |
| 12 | 5 | 12.750 | 12.420 | .165 | 22.18 |
| 12 | 10 | 12.750 | 12.390 | .180 | 24.16 |
| 12 | 20 | 12.750 | 12.250 | .250 | 33.38 |
| 12 | 30 | 12.750 | 12.090 | .330 | 43.77 |
| 12 | STD | 12.750 | 12.000 | .375 | 49.56 |
| 12 | 40 | 12.750 | 11.938 | .406 | 53.52 |
| 12 | 60 | 12.750 | 11.625 | .562 | 73.15 |
| 12 | XH | 12.750 | 11.750 | .500 | 65.42 |
| 12 | 80 | 12.750 | 11.375 | .688 | 88.63 |
| 12 | 100 | 12.750 | 11.062 | .844 | 107.3 |
| 12 | 120 | 12.750 | 10.750 | 1.000 | 125.5 |
| 12 | 140 | 12.750 | 10.500 | 1.125 | 139.67 |
| 12 | 160 | 12.750 | 10.125 | 1.312 | 160.3 |
| 12 | XXH | 12.750 | 10.750 | 1.000 | 125.5 |
| 14 | 10 | 14.000 | 13.500 | .250 | 36.71 |
| 14 | 20 | 14.000 | 13.375 | .312 | 45.61 |
| 14 | 30 | 14.000 | 13.250 | .375 | 54.57 |
| 14 | STD | 14.000 | 13.250 | .375 | 54.57 |
| 14 | 40 | 14.000 | 13.125 | .438 | 63.44 |
| 14 | 60 | 14.000 | 12.812 | .594 | 85.05 |
| 14 | XH | 14.000 | 13.000 | .500 | 72.09 |
| 14 | 80 | 14.000 | 12.500 | .750 | 106.1 |
| 14 | 100 | 14.000 | 12.125 | .938 | 130.9 |
| 14 | 120 | 14.000 | 11.812 | 1.094 | 150.8 |
| 14 | 140 | 14.000 | 11.500 | 1.250 | 170.2 |
| 14 | 160 | 14.000 | 11.188 | 1.406 | 189.1 |
| 16 | 10 | 16.000 | 15.500 | .250 | 42.05 |
| 16 | 20 | 16.000 | 15.375 | .312 | 52.27 |
| 16 | 30 | 16.000 | 15.250 | .375 | 62.58 |
| 16 | STD | 16.000 | 15.250 | .375 | 62.48 |
| 16 | 40 | 16.000 | 15.000 | .500 | 82.77 |
| 16 | 60 | 16.000 | 14.688 | .656 | 107.5 |
| 16 | XH | 16.000 | 15.000 | .500 | 82.77 |
| 16 | 80 | 16.000 | 14.312 | .844 | 136.6 |
| 16 | 100 | 16.000 | 13.938 | 1.031 | 164.8 |
| 16 | 120 | 16.000 | 13.562 | 1.219 | 192.4 |
| 16 | 140 | 16.000 | 13.125 | 1.438 | 223.6 |
| 16 | 160 | 16.000 | 12.812 | 1.594 | 245.3 |
| 18 | 10 | 18.000 | 17.500 | .250 | 47.39 |
| 18 | 20 | 18.000 | 17.375 | .312 | 58.94 |
| 18 | 30 | 18.000 | 17.125 | .438 | 82.15 |
| 18 | STD | 18.000 | 17.250 | .375 | 70.59 |
| 18 | 40 | 18.000 | 16.875 | .562 | 104.7 |
| 18 | 60 | 18.000 | 16.500 | .750 | 138.2 |
| 18 | XH | 18.000 | 17.000 | .500 | 93.45 |
| 18 | 80 | 18.000 | 16.125 | .938 | 170.9 |
| 18 | 100 | 18.000 | 15.688 | 1.156 | 208.0 |
| 18 | 120 | 18.000 | 15.25 | 1.375 | 244.1 |
| 18 | 140 | 18.000 | 14.875 | 1.562 | 274.2 |
| 18 | 160 | 18.000 | 14.438 | 1.781 | 308.5 |
| 20 | 10 | 20.000 | 19.500 | .250 | 52.73 |
| 20 | 20 | 20.000 | 19.250 | .375 | 78.60 |
| 20 | 30 | 20.000 | 19.000 | .500 | 104.1 |
| 20 | STD | 20.000 | 19.250 | .375 | 78.60 |
| 20 | 40 | 20.000 | 18.812 | .594 | 123.1 |
| 20 | 60 | 20.000 | 18.375 | .812 | 166.4 |
| 20 | XH | 20.000 | 19.000 | .500 | 104.1 |
| 20 | 80 | 20.000 | 17.938 | 1.031 | 208.9 |
| 20 | 100 | 20.000 | 17.438 | 1.281 | 256.1 |
| 20 | 120 | 20.000 | 17.000 | 1.500 | 296.4 |
| 20 | 140 | 20.000 | 16.500 | 1.750 | 341.1 |
| 20 | 160 | 20.000 | 16.062 | 1.969 | 379.2 |
| 24 | 10 | 24.000 | 23.500 | .250 | 63.41 |
| 24 | 20 | 24.000 | 23.250 | .375 | 94.62 |
| 24 | 30 | 24.000 | 22.875 | .562 | 140.7 |
| 24 | STD | 24.000 | 23.250 | .375 | 94.62 |
| 24 | 40 | 24.000 | 22.625 | .688 | 171.3 |
| 24 | 60 | 24.000 | 22.062 | .969 | 238.4 |
| 24 | XH | 24.000 | 23.000 | .500 | 125.5 |
| 24 | 80 | 24.000 | 21.562 | 1.219 | 296.6 |
| 24 | 100 | 24.000 | 20.938 | 1.531 | 367.4 |
| 24 | 120 | 24.000 | 20.375 | 1.812 | 429.4 |
| 24 | 140 | 24.000 | 19.875 | 2.062 | 483.1 |
| 24 | 160 | 24.000 | 19.312 | 2.344 | 542.1 |