+91-9821137386
Table Of Content
We offer a wide selection of Astm A312 304 Pipe, Astm A312 TP304 Stainless Steel Seamless Pipe, and a diverse range of finish options to meet the performance and appearance requirements for most applications.Astm A312 304 Pipe, Astm A312 TP304 Stainless Steel Seamless Pipe Stockist in Usa, Canada,UK, Uae,South Korea, Iran,Saudi Arabia, Malaysia, Italy, Singapore, Indonesia, Thailand, Germany,Australia, Turkey, Taiwan, Mexico, Vietnam, Spain, Netherlands, France, Poland, Brazil, Philippines, Japan, Kuwait, India, Philippines, United States,Usa,UK, Pakistan, Saudi Arabia(Ksa), United Arab Emirates(Uae), Indonesia, Sri Lanka, Iran, Hong Kong, Nigeria, Poland, Netherlands, Bahrain, Bangladesh, Belgium, Oman, Malaysia, Kuwait, Qatar, Canada, Argentina, Singapore, Japan, Thailand, Bahrain, Chennai, Gujarat, Mumbai, Turkey, Italy, South Korea | Depot & around the globe.
304 Stainless Steel Pipes and Tubes Product Range
304 Stainless Steel Pipes and Tubes Specifications: ASTM A/ASME SA213, A249, A269, A312, A358 CL. I to V ASTM A789/A790
304 Stainless Steel Pipes and Tubes Sizes (Seamless): 1/2" NB - 16" NB
304 Stainless Steel Pipes and Tubes Sizes (ERW): 1/2" NB - 24" NB
304 Stainless Steel Pipes and Tubes Sizes (EFW): 6" NB - 100" NB
304 Stainless Steel Pipes and Tubes Wall Thickness available:
Schedule 5S - Schedule XXS (heavier on request)
Type 304 Stainless Steel has excellent welding and deep drawing characteristics - it is easy to fabricate, easy to clean and aesthetically pleasing to the eye.
Pipe/Tube/Tubing Type | NB Sizes | Sch 5 | Sch 10 | Sch 40 | Sch 80 | Sch 160 |
---|---|---|---|---|---|---|
Astm A312 TP304 Stainless Steel Seamless Pipe | 1/8″ | ![]() | ![]() | ![]() | ![]() | |
Astm A312 TP304 Stainless Steel Seamless Pipe | 1/4″ | ![]() | ![]() | ![]() | ![]() | |
Astm A312 TP304 Stainless Steel Seamless Pipe | 3/8″ | ![]() | ![]() | ![]() | ![]() | |
Astm A312 TP304 Stainless Steel Seamless Pipe | 1/2″ | ![]() | ![]() | ![]() | ![]() | ![]() |
Astm A312 TP304 Stainless Steel Seamless Pipe | 3/4″ | ![]() | ![]() | ![]() | ![]() | ![]() |
Astm A312 TP304 Stainless Steel Seamless Pipe | 1″ | ![]() | ![]() | ![]() | ![]() | ![]() |
Astm A312 TP304 Stainless Steel Seamless Pipe | 1 1/4″ | ![]() | ![]() | ![]() | ![]() | ![]() |
Astm A312 TP304 Stainless Steel Seamless Pipe | 1 1/2″ | ![]() | ![]() | ![]() | ![]() | ![]() |
Astm A312 TP304 Stainless Steel Seamless Pipe | 2″ | ![]() | ![]() | ![]() | ![]() | ![]() |
Astm A312 TP304 Stainless Steel Seamless Pipe | 2 1/2″ | ![]() | ![]() | ![]() | ![]() | ![]() |
Astm A312 TP304 Stainless Steel Seamless Pipe | 3″ | ![]() | ![]() | ![]() | ![]() | ![]() |
Astm A312 TP304 Stainless Steel Seamless Pipe | 4″ | ![]() | ![]() | ![]() | ![]() | ![]() |
Astm A312 TP304 Stainless Steel Seamless Pipe | 5″ | ![]() | ![]() | ![]() | ![]() | |
Astm A312 TP304 Stainless Steel Seamless Pipe | 6″ | ![]() | ![]() | ![]() | ![]() |
ASTM Standards: ASTM A312, ASTM A213, ASTM A269, ASTM A376
European Standards: DIN 17456, DIN 17458, EN 10216, EN 10297
Japanese Standards: JIS G 3459, JIS GS3463, GS3467, JIS G3448
Russian Standards: GOST 9940, GOST 9941
We firstly possess a perfectly developed transport by which we can deliver goods directly from the warehouse to the customer. Secondly, we direct traffic, which ensures a delivery from the factory to customers from 15 tons. Astm A312 TP304 Stainless Steel Seamless Pipe that are not in stock at our own warehouse are based on the star traffic from other sites - every day! We aim at providing professional customer service with one-stop purchasing, along with superior quality control, competitive price, fast lead time and convenient transportation.
While marking we choose a specific item number as well different color shade to differentiate steel grades. We mark Astm A312 TP304 Stainless Steel Seamless Pipe as needed with the most suitable & visible marking technique.
We deliver from stock and warehousing as well as directly from the mill.
Packaging is an integral part of the product. It guarantees that the Astm A312 TP304 Stainless Steel Seamless Pipe is delivered to the customer in the required quality. For smaller orders the size of the Astm A312 TP304 Stainless Steel Seamless Pipe bundle depends on the no. of Tubes ordered, for larger orders the tubes are packed into individual bundles and in such a way that the maximum weight of 4000kg per bundle is not excedded. Bundle tied down with steel tape. Bundle tied down by steel strap underlaid by tapaten.
We can also provide Astm A312 TP304 Stainless Steel Seamless Pipe wooden box packing, cardboard boxes, plastic wrapping, using hardened paper with PE meshing (used as protection against mechanical damages of tubes), into tapaten and polyethylene sheet etc.
ISO 9001:2008 Certified company
Chemistry % by Weight
Element | ||||
---|---|---|---|---|
Type 302 | Type 304 | Type 304L | Type 305 | |
Fe | 64.99-74% | |||
Cr | 17% | 18% | 18% | 17% |
Ni | 8% | 8% | 8% | 10.50% |
Mn | 2% | 2% | 2% | 2% |
N | 0.10% | 0.10% | 0.10% | - |
S | 0.03% | 0.03% | 0.03% | 0.03% |
C | 0.15% | 0.08% | 0.03% | 0.12% |
Si | 0.75% | 0.75% | 0.75% | 0.75% |
P | 0.045% | 0.045% | 0.045% | 0.045% |
304 Stainless Steel Pipes and Tubes Composition
Typical compositional ranges for grade 304 stainless steels are given in table 1.
Table 1. Composition ranges for 304 grade stainless steel
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
---|---|---|---|---|---|---|---|---|---|---|
304 | min. | - | - | - | - | - | 18.0 | - | 8.0 | - |
max. | 0.08 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 10.5 | 0.10 | ||
304L | min. | - | - | - | - | - | 18.0 | - | 8.0 | - |
max. | 0.030 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 12.0 | 0.10 | ||
304H | min. | 0.04 | - | - | - | - | 18.0 | - | 8.0 | - |
max. | 0.10 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 10.5 |
304 Stainless Steel Pipes and Tubes Mechanical Properties
Typical mechanical properties for grade 304 stainless steels are given in table 2.
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
304 | 515 | 205 | 40 | 92 | 201 |
304L | 485 | 170 | 40 | 92 | 201 |
304H | 515 | 205 | 40 | 92 | 201 |
304H also has a requirement for a grain size of ASTM No 7 or coarser. |
304 Stainless Steel Pipes and Tubes Physical Properties
Typical physical properties for annealed grade 304 stainless steels are given in table 3.
Table 3. Physical properties of 304 grade stainless steel in the annealed condition
Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (m/m/0C) | Thermal Conductivity(W/m.K) | Specific Heat 0-1000C(J/kg.K) | Electrical Resistivity (n.m) | |||
---|---|---|---|---|---|---|---|---|---|
0-1000C | 0-3150C | 0-5380C | at 1000C | at 5000C | |||||
304/L/H | 8000 | 193 | 17.2 | 17.8 | 18.4 | 16.2 | 21.5 | 500 | 720 |
304 Stainless Steel Pipes and Tubes Grade Specification Comparison
Approximate grade comparisons for 304 stainless steels are given in table 4.
Table 4. Grade specifications for 304 grade stainless steel
Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
---|---|---|---|---|---|---|---|
BS | En | No | Name | ||||
304 | S30400 | 304S31 | 58E | 1.4301 | X5CrNi18-10 | 2332 | SUS 304 |
304L | S30403 | 304S11 | - | 1.4306 | X2CrNi19-11 | 2352 | SUS 304L |
304H | S30409 | 304S51 | - | 1.4948 | X6CrNi18-11 | - | - |
These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted. |
304 Stainless Steel Pipes and Tubes Corrosion Resistance
Excellent in a wide range of atmospheric environments and many corrosive media. Subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 600C. Considered resistant to potable water with up to about 200mg/L chlorides at ambient temperatures, reducing to about 150mg/L at 600C.304 Stainless Steel Pipes and Tubes Heat Resistance
Good oxidation resistance in intermittent service to 8700C and in continuous service to 9250C. Continuous use of 304 in the 425-8600C range is not recommended if subsequent aqueous corrosion resistance is important. Grade 304L is more resistant to carbide precipitation and can be heated into the above temperature range.
Grade 304H has higher strength at elevated temperatures so is often used for structural and pressure-containing applications at temperatures above about 5000C and up to about 8000C. 304H will become sensitised in the temperature range of 425-8600C; this is not a problem for high temperature applications, but will result in reduced aqueous corrosion resistance.
304 Stainless Steel Pipes and Tubes Heat Treatment
Reliable Pipe & Tubes supply Astm A312 TP304 Stainless Steel Seamless Pipe to
Reliable Pipe & Tubes supply other products to
Seamless & Welded tubes we export to:
Formula for Good Business
Quality Astm A312 TP304 Stainless Steel Seamless Pipe + Prompt Service + Better Rates = Customers’ Satisfaction
Reliant Pipe & Tubes BHEL,ONGC, Saudi Aramco, NIOC Approved one of the oldest dealer & supplier of stainless Steel pipes Astm312/A358/A778,ASME B36.19M.Stainless steel pipes are used in constructions, food industry, pharmaceutical industry, petrochemical industry, automotive industry, municipal and decorative purposes. All Astm312/A358/A778,ASME B36.19M are individually covered so that the premium quality of materials is retained and there are no damges in the last stages of production.
Astm 312/A358/A778, ASME B36.19M.We manufacture Stainless Steel Pipes & Tubes for usage and application in different industries. These pipes and tubes are rigidly designed by using the graded stainless steel and advanced tools. This range of pipes & tubes can be accessed in various designs, lengths, diameters and finishes. Our product lines are widely acknowledged for their salient attributes like high tolerance, durable stability, rust resistance, fine finish and long working life. These products are ideal for various projects in industries such as aero-space, food & dairy, paper industry, chemical and power plants.
Port: JNPT PORT, MUMBAI (INDIA)
Payment Terms: L/C, T/T, Western Union
GRADE:TP304/304L, TP316/316L
STANDARD:ASTM A312/A358/A778, ASME B36.19M
O.D.:1/4″~80″
W.T.:SCH-5S, SCH-10S, SCH-40S
WELDING METHOD:TIG or TIG + Plasma or Laser
APPLICATION:Chemical & Petrochemical use etc.
PACKING:Sea Worthy Bundle or Steel Crate
All Astm312/A358/A778,ASME B36.19M are individually covered so that the premium quality of materials is retained and there are no damges in the last stages of production. We also ensure that we deliver our orders promplty and that the quality remains intact.
All Astm312/A358/A778,ASME B36.19M have imprints on them to highlight the specification of the pipes.
NOMINAL DIAMETER NPS | OUTSIDE DIAMETER(MM) | SCH-5S WALL THICKNESS(MM) | SCH-10S WALL THICKNESS(MM) | SSCH-40S WALL THICKNESS(MM) |
---|---|---|---|---|
1/4 | 13.72 | 1.65 | 2.24 | |
3/8 | 17.15 | 1.65 | 2.31 | |
1/2 | 21.34 | 1.65 | 2.11 | 2.77 |
3/4 | 26.67 | 1.65 | 2.11 | 2.87 |
1 | 33.40 | 1.65 | 2.77 | 3.38 |
1 1/4 | 42.16 | 1.65 | 2.77 | 3.56 |
1 1/2 | 48.26 | 1.65 | 2.77 | 3.68 |
2 | 60.33 | 1.65 | 2.77 | 3.91 |
2 1/2 | 73.03 | 2.11 | 3.05 | 5.16 |
3 | 88.90 | 2.11 | 3.05 | 5.49 |
3 1/2 | 101.60 | 2.11 | 3.05 | 5.74 |
4 | 114.30 | 2.11 | 3.05 | 6.02 |
5 | 141.30 | 2.77 | 3.40 | 6.55 |
6 | 168.28 | 2.77 | 3.40 | 7.11 |
8 | 219.08 | 2.77 | 3.76 | 8.18 |
10 | 273.05 | 3.40 | 4.19 | 9.27 |
12 | 323.85 | 3.96 | 4.57 | 9.53 |
14 | 355.60 | 3.96 | 4.78 | 9.53 |
16 | 406.40 | 4.19 | 4.78 | 9.53 |
18 | 457.20 | 4.19 | 4.78 | 9.53 |
20 | 508.00 | 4.78 | 5.54 | 9.53 |
22 | 558.80 | 4.78 | 5.54 | |
24 | 609.60 | 5.54 | 6.35 | 9.53 |
30 | 762.00 | 6.35 | 7.92 | |
32 | 80 | 812.8 | 2032.0 | (Thickness):6.35~30mm Nominal diameter and wall thickness subject to the approval of vendor and purchaser |
ASME B36.19 Pipe Size Chart – pipes weight in kg/meter by pipe NPS and schedule
NPS | OD | Schedule | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
5S | 10S | 40S | 80S | ||||||||||
(mm) | (inch) | WT / WEIGHT | |||||||||||
mm (in) | kg/m | mm (in) | kg/m | mm (in) | kg/m | mm (in) | kg/m | ||||||
1/8 | 10.3 | 0.405 | – | – | 1.25 (0.049) | 0.28 | 1.73 (0.068) | 0.37 | 2.42 (0.095) | 0.47 | |||
1/4 | 13.7 | 0.540 | – | – | 1.66 (0.065) | 0.49 | 2.24 (0.088) | 0.63 | 3.03 (0.119) | 0.80 | |||
3/8 | 17.2 | 0.675 | – | – | 1.66 (0.065) | 0.63 | 2.32 (0.091) | 0.85 | 3.20 (0.126) | 1.10 | |||
1/2 | 21.3 | 0.840 | 1.65 (0.065) | 0.81 | 2.11 (0.083) | 1.00 | 2.77 (0.109) | 1.27 | 3.74 (0.147) | 1.62 | |||
3/4 | 26.7 | 1.050 | 1.65 (0.065) | 1.02 | 2.11 (0.083) | 1.28 | 2.87 (0.113) | 1.68 | 3.92 (0.154) | 2.20 | |||
1 | 33.4 | 1.315 | 1.65 (0.065) | 1.30 | 2.77 (0.109) | 2.09 | 3.38 (0.133) | 2.50 | 4.55(0.179) | 3.24 | |||
1 1/4 | 42.2 | 1.660 | 1.65 (0.065) | 1.66 | 2.77 (0.109) | 2.69 | 3.56 (0.140) | 3.39 | 4.86 (0.191) | 4.47 | |||
1 1/2 | 48.3 | 1.900 | 1.65 (0.065) | 1.91 | 2.77 (0.109) | 3.11 | 3.69 (0.145) | 4.06 | 5.08 (0.200) | 5.41 | |||
2 | 60.3 | 2.375 | 1.65 (0.065) | 2.40 | 2.77 (0.109) | 3.93 | 3.92 (0.154) | 5.45 | 5.54 (0.218) | 7.49 | |||
2 1/2 | 73.0 | 2.875 | 2.11 (0.083) | 3.69 | 3.05 (0.120) | 5.26 | 5.16 (0.203) | 8.64 | 7.01 (0.276) | 11.4 | |||
3 | 88.9 | 3.500 | 2.11 (0.083) | 4.52 | 3.05 (0.120) | 6.46 | 5.49 (0.216) | 11.3 | 7.62 (0.300) | 15.3 | |||
3 1/2 | 101.6 | 4.000 | 2.11 (0.083) | 5.18 | 3.05 (0.120) | 7.41 | 5.74 (0.226) | 13.6 | 8.08 (0.318) | 18.6 | |||
4 | 114.3 | 4.500 | 2.11 (0.083) | 5.84 | 3.05 (0.120) | 8.37 | 6.02 (0.237) | 16.1 | 8.56 (0.337) | 22.3 | |||
5 | 141.3 | 5.563 | 2.77 (0.109) | 9.46 | 3.41 (0.134) | 11.6 | 6.56 (0.258) | 21.8 | 9.53 (0.375) | 31.0 | |||
6 | 168.3 | 6.625 | 2.77 (0.109) | 11.3 | 3.41 (0.134) | 13.9 | 7.12 (0.280) | 28.3 | 10.9 (0.432) | 42.6 | |||
8 | 219.1 | 8.625 | 2.77 (0.109) | 14.8 | 3.76 (0.148) | 20.0 | 8.18 (0.322) | 42.5 | 12.7 (0.500) | 64.6 | |||
10 | 273.1 | 10.750 | 3.41 (0.134) | 22.7 | 4.20 (0.165) | 27.8 | 9.28 (0.365) | 60.4 | 12.7 (0.500) | 81.5 | |||
12 | 323.9 | 12.750 | 3.97 (0.156) | 31.3 | 4.58 (0.180) | 36.1 | 9.53 (0.375) | 73.9 | 12.7 (0.500) | 97.4 |
Allowed Outside Diameter Tolerance | ||||
---|---|---|---|---|
Over | Under | |||
inches | mm | inches | mm | |
NPS 1/8 to 1½ DN 6 to 40 OD 10.3 to 48.3, mm | 1/64 | 0.4 | 1/64 | 0.4 |
Over 1½ to 4 DN 40 to 100 OD 48.3 to 114.3, mm | 1/32 | 0.8 | 1/32 | 0.8 |
Over 4 to 8 DN 100 to 200 OD 114.3 to 219.1, mm | 1/16 | 1.6 | 1/32 | 0.8 |
Over 8 to 18 DN 200 to 450 OD 219.1 to 457, mm | 3/32 | 2.4 | 1/32 | 0.8 |
Over 18 to 26 DN 450 to 650 OD 457 to 660, mm | 1/8 | 3.2 | 1/32 | 0.8 |
Tolerance, % from Nominal | ||
---|---|---|
Over | Under | |
NPS 1/8 to 2½, incl, all t/D ratios DN 6 to 65 OD 10.3 to 73.0, mm | 20.0 | 12.5 |
NPS 3 to 18, incl, t/D up to 5% DN 80 to 450 OD 88.9 to 457, mm | 22.5 | 12.5 |
NPS 3 to 18, incl, t/D > 5% DN 80 to 450 OD 88.9 to 457, mm | 15.0 | 12.5 |
NPS 20 and larger, incl, welded, all t/D ratios DN 500 OD 508, mm | 17.5 | 12.5 |
NPS 20 and larger, incl, seamless, t/D up to 5% DN 500 OD 508, mm | 22.5 | 12.5 |
NPS 20 and larger, incl, seamless, t/D > 5% DN 500 OD 508, mm | 15.0 | 12. |
Should be within -10% to +10% tolerance, as a rule of thumb (-3/+3% should be acceptable).
People Also Search :