P11 Seamless Pipe | Alloy Steel Pipe Weight Calculator | Alloy Steel Pipes Price List in India
- Email Id :
- Call Us: :
+91-9821137386
+91-9821137386
Table Of Content
A335 P1 Alloy steel Seamless PipeReliant Pipes is focusing on Customer Service not only just manufacturing Alloy steel piping products. our total commitment to genuine customer service and stand behind our Stainless steel piping connections, Reliant Pipes is not only Manufacturer of A335 P11 Alloy Steel Seamless Pipe, AS mechanical tubes, Alloy steel a positive working environment for staff and continual improvement strategies, now sees the company as a significant manufacturer of steel U Seamless tubing in India.our Indian Make Alloy Steel Seamless A335 P11 Alloy Steel Seamless Pipe is in high demand in UK, Italy, Netherlands and south Africa.currently we are one of the best exporter of A335 P11 Alloy Steel Seamless Pipe & Stainless steel mechanical tubes in India.Our stockholder of Alloy, SS capilary tubing, SS heat exchanger tubes are available in Indonesia, Malaysia, Vietnam, Thailand & Singapore.we can offer A335 P11 Alloy Steel Seamless Pipe best price in UK, Italy, Malaysia & Indonesia.check our Price list of A335 P11 Alloy Steel Seamless Pipe & A335 P11 Alloy Steel Seamless Pipe before buying A335 P11 Alloy Steel Seamless Pipe from India or China.we have our dealer & distributors in Gujarat, Tamil Nadu, Karnatka, Kerala, Bengal, Goa, Rajasthan, Madhya Pradesh, Chattisgarh, Jarkhand, Assam.
If you don’t see what you’re looking for just call one of our team members at +91-22-66310022 Or Mail Us reliant@reliant.in. No inquiry is too large or too small, we specialize in locating hard to find items. If you do see what you are looking, we would love to assist you and give you a quote today!
Grade | C | Mn | P | S | Si | Cr | Mo |
P5 | 0.15max | 0.30-0.60 | 0.025 | 0.025 | 0.50 max | 4.00-6.00 | 0.45-0.65 |
P9 | 0.15 max | 0.30-0.60 | 0.025 | 0.025 | 0.25-1.00 | 8.00-10.00 | 0.90-1.10 |
P11 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 |
P22 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.50 max | 1.90-2.60 | 0.87-1.13 |
P91 | 0.08-0.12 | 0.30-0.60 | 0.02 | 0.01 | 0.20-0.50 | 8.00-9.50 | 0.85-1.05 |
V 0.18-0.25 | N 0.03-0.07 | Ni 0.40 max | Al 0.02 max | Cb 0.06-0.10 | Ti 0.01 max | Zr 0.01 max |
Mechanical Properties | |||||
Grade | Tensile strength(MPa) | Yield strength(MPa) | Elongation(%) | Impact energy(J) | Hardness |
P11 | ≥ 415 | ≥ 205 | ≥ 22 | ≥ 35 | ≤ 163HB |
P12 | ≥ 415 | ≥ 220 | ≥ 22 | ≥ 35 | ≤ 163HB |
P22 | ≥ 415 | ≥ 205 | ≥ 22 | ≥ 35 | ≤ 163HB |
P5 | ≥ 415 | ≥ 205 | ≥ 22 | ≥ 35 | ≤ 187HB |
P91 | 585~760 | ≥ 415 | ≥ 20 | ≥ 35 | ≤ 250HB |
P92 | ≥ 620 | ≥ 440 | ≥ 20 | ≥ 35 | 250HB |
NPS | OD Tolerance | NPS | WT Tolerance |
1/8″ ≤ NPS ≤ 1 1/2″ | +/- 0.4 | 1/8″ ≤ NPS ≤ 2 1/2″ , All T/D ratios. | +20%, -12.5% |
1 1/2 < NPS ≤ 4″ | +/- 0.79 | NPS ≥ 2 1/2″ , T/D ≤ 5% | +22.5%, -12.5% |
4″ < NPS ≤ 8″ | +1.59, -0.79 | NPS ≥ 2 1/2″ , T/D > 5% | +15%, -12.5% |
8″ < NPS ≤ 12″ | +2.38, -0.79 | (T= Specified Wall Thickness; D = Specified Outside Diameter) | |
NPS > 12″ | +/- 1% | ||
This specification covers seamless ferritic alloy-steel pipe for high-temperature service. The pipe shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Grade P2 and P12 steel pipes shall be made by coarse-grain melting practice. The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The range of pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.
Trade Name | Grade | UNS # | Pipe | Forged / Bored Pipe * |
1 1/4 Chrome | P11 | K11597 | A335 / SA335 | A369 / SA369 |
2 1/4 Chrome | P22 | K21590 | A335 / SA335 | A369 / SA369 |
5 Chrome | P5 | K41545 | A335 / SA335 | A369 / SA369 |
9 Chrome | P9 | S50400 | A335 / SA335 | A369 / SA369 |
P91 | P91 | K91560 | A335 / SA335 | A369 / SA369 |
P92 | P92 | K92460 | A335 / SA335 | A369 / SA369 |
Reliant Pipes is India's 4th largest Stockholder of ASTM A234 WP5, WP9, WP11, WP22, WP91 such as buittweld fittings, forged fittings, forged flanges, fasteners and gaskets.
| Size | : | 1/8NB TO 24NB IN |
| Standards | : | ASTM A 335, ASME SA 335 |
| Type | : | Seamless |
| Specialized in | : | Large Diameter Size |
| Outer Dimensions | : | 19.05mm – 114.3mm |
| Wall Thickness | : | 2.0mm – 14 mm |
| Length | : | max 16000mm |
| Schedule | : | Schedule 20 - Schedule 20,Schedule 40, Schedule 60, Schedule 80, Schedule 100 Schedule 120, Schedule 160, Schedule XS, Schedule XXS (heavier on request) up to 250 mm thk. |
| Form | : | Round, Square, Rectangular, Hydraulic Etc. |
| Length | : | Single Random, Double Random & Cut Length. |
| Tubing End | : | Plain End, Beveled End, Treaded. |
| C, % | Mn, % | P, % | S, % | Si, % | Cr, % | Mo, % |
| 0.015 max | 0.30-0.60 | 0.025 max | 0.025 max | 0.50 max | 4.00-6.00 | 0.45-0.65 |
| Tensile Strength, MPa | Yield Strength, MPa | Elongation, % |
| 415 min | 205 min | 30 min |
| P5, P9, P11, and P22 |
|
|
Grade | Heat Treatment Type | Normalizing Temperature Range F [C] | Subcritical Annealing |
P5 (b,c) | Full or Isothermal Anneal |
| |
| Normalize and Temper | ***** | 1250 [675] |
| Subcritical Anneal (P5c only) | ***** | 1325 - 1375 [715 - 745] |
P9 | Full or Isothermal Anneal |
| |
| Normalize and Temper | ***** | 1250 [675] |
P11 | Full or Isothermal Anneal |
| |
| Normalize and Temper | ***** | 1200 [650] |
P22 | Full or Isothermal Anneal |
| |
| Normalize and Temper | ***** | 1250 [675] |
P91 | Normalize and Temper | 1900-1975 [1040 - 1080] | 1350-1470 [730 - 800] |
| Quench and Temper | 1900-1975 [1040 - 1080] | 1350-1470 [730 - 800] |
| Seamless |
| ||||
P-5 | P-9 | P-11 | P-22 | P-91 | P91 shall not have a hardness not exceeding 250 HB/265 HV [25HRC]. | |
Tensile Strength, min., psi | ||||||
ksi | 60 | 60 | 60 | 60 | 85 | |
MPa | 415 | 415 | 415 | 415 | 585 |
|
Yield Strength, min., psi |
| |||||
ksi | 30 | 30 | 30 | 30 | 60 |
|
MPa | 205 | 205 | 205 | 205 | 415 |
|
